Visit the Craftsman Home Remodeling Website

Thursday, May 31, 2007

Dining Room Table Being Built

A month before Dave Barlow was finished with the interior woodwork, I asked him if he thought he could build a dining room table out of mahogany and ebony from plans that I saw in a woodworking magazine. After a few weeks of studying the drawings, Dave said " Do you want it exactly like the plans show?" I asked him why and he told me that he could make it better. So we started. Below are a few pictures of this table being built. It took 5 months to complete.
The table is modeled after a table in the Robinson House, another Greene and Greene design. With both leaves in, it can comfortably seat 14, without the leaves it can easily seat 8. It weighs in at about 150 lbs for the base and 150 lbs for the top. The extensions are wood sliding on wood, there are no metal sliders. Also notice that your knees won't hit anywhere around the table.


IMG_4536 IMG_4537 IMG_4538 IMG_4539 IMG_4540 IMG_4541 Craftsman mahogany and ebony table Craftsman mahogany and ebony table IMG_4546 IMG_4547 Craftsman mahogany and ebony table top Craftsman mahogany and ebony table edge is raised 1/16 Craftsman mahogany and ebony table. The edge is attached with many biscuits and adhesive. Craftsman mahogany and ebony table extension sliders Craftsman mahogany and ebony table clear coating Craftsman mahogany and ebony table stops Craftsman mahogany and ebony table top pins Craftsman mahogany and ebony table finished Craftsman mahogany and ebony table

3 comments:

  1. Your table is amazing! Is it solid mahogan or just veneered? Also, I see little black squares. Is that the ebony?

    ReplyDelete
  2. I'm glad you like it! The table is solid Honduran mahogany, hence the 150 pound weight. The little black squares you see are pieces of ebony. In fact, the ebony in the table is from the same piece of wood as the ebony used throughout the rest of the house.

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete